Hot
Passive Speaker 8Ω 5W, JST-PH2.0 Interface.
- Brand: CQRobot
- Weight: 78.00g
- SKU: CQRLB8O5W-A
$3.99
Ex Tax: $3.99
10 or more $3.79
50 or more $3.63
100 or more $3.51
200 or more $3.39
500 or more $3.19
CQRobot painstakingly deploys this passive speaker small speaker for the Makers and electronic enthusiasts, this small passive speaker with JST-PH2.0 interface, the internal resistance is 8 ohms, the power of it is 5 watts. Strip size, with mounting screw, suitable for all kinds of sound source fabrication, the sound is clear and melodious without distortion.
APPLICATION
- Arduino, Raspberry Pi
- Advertising Machine, Robot, Game Machine
- Integrated Machine Special Speaker
TECHNICAL SPECIFICATIONS
- Impedance: 8 Ohm Plus/Minus 15% at 1000Hz.1V
- Power Rating: Rated Power / Maximum Power 5.0W / 5.5W
- FO: 450Hz Plus/Minus 150Hz at 1.0V
- S.P.L: 94dB Plus/Minus 3dB/1.0 Watt 0.1Meter; Average At1000, 1200, 1500, 2000Hz.
- Frequency Range: FO to 10,000Hz. Average SPL-10dB.
- Distortion: 10% Maximum at 1000Hz.1.0V.
- Abnormal Sound Test: Must be Normal Tested by 6.32; Volts.Sine wave for 50 to 5KHZ.
- Polarity: Diaphragm Shall Move Forward When Apply a Positive DC. Red "+" or "Marked" Terminal.
- Operating Temperature: -25 Degree Celsius to +65 Degree Celsius.
- Storage Temperature: -25 Degree Celsius to +65 Degree Celsius.
- High Temperature Storage Test: 65 Degree Celsius Plus/Minus 2 Degree Celsius - 96 Hours.
- Low Temperature Storage Test: -25 Degree Celsius Plus/Minus 2 Degree Celsius - 96 Hours.
- Size: 70mm * 31mm * 16mm.
- Screw hole distance: 24mm * 63mm.
- Interface: JST PH2.0 2-Pin.
- Interface cable length: 40cm.
- Total weight: 24g.
SHIPPING LIST
2 * Passive Speaker 8Ω 5W (JST-PH2.0 Interface)