Menu
Your Cart

Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)

Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)

Round-Stainless Steel Threaded Capacitive Fingerprint Sensor (with LED)
  • Brand: CQRobot
  • Weight: 65.00g
  • SKU: TB-R503-200-25-19
$23.39
Ex Tax: $23.39
2 or more $22.92
5 or more $22.22
10 or more $21.05

INTRODUCTION

This fingerprint recognition module uses a 192*192 pixel capacitive fingerprint sensor with a fingerprint capacity of 200. Built-in complete fingerprint recognition algorithm and protocol. It has functions such as fingerprint collection, fingerprint comparison, search and template storage. It supports low-power finger detection and has waterproof function to meet more application fields.

FEATURE

  • Built-in algorithm chip, circular acquisition chip, using a 192x192 pixel sensor, it can store 200 fingerprint.
  • Integrated image collection and algorithm chip together, it has professional performance.
  • High recognition rate, flexible for using, it can adapt to dry fingers, wet fingers, light texture fingerprints fingers, and old fingers.
  • Wide application areas, can be embedded in a variety of final products, such as: access control, assistance, safety box.
  • Simple installation, no need complicated tools, convenient for using.

SPECIFICATION

  • Item Type: Capacitive Fingerprint Identification Module
  • Housing Type: Round-Stainless Steel Threaded Housing
  • Housing Diameter: 28mm
  • Thread Diameter: 25mm
  • Housing Height: 19mm
  • Communication port: TTL-232
  • Interface Type: MX1.0-6P
  • Cable Length: 25cm
  • With LED: 7-color LED light ring
  • Operating Voltage: DC 3.3V
  • Operating Current: 20mA
  • Standby Current: 2uA
  • Power-On Start Time: ≤50ms
  • Acquisition Area: Diameter 15mm/0.59in
  • Image Pixel: 192x192 Pixel
  • Image Resolution: 508dpi
  • Eigenvalue Generation Time: <500ms
  • Eigenvalue Size: 512 bytes
  • Fingerprint Template Size: 1536 bytes
  • Storage Capacity: 200pcs
  • Comparison Method: 1:1
  • Search Mode: 1:N
  • Matching Time: <10ms
  • FAR: ≤0.001%
  • FRR: ≤1.0%
  • Communication Interface: UART (3.3V TTL level), default 57600bps
  • Working Environment: -20℃~+60℃, 10%~85%RH(without condensation)
  • Storage Environment: -40℃~+75℃, <85%RH(without condensation)

SHIPPING LIST

1 * Round-Stainless Steel Threaded Capacitive Fingerprint Sensor(200-25-19)

Write a review

Note: HTML is not translated!
Bad Good