FPM093D Capacitive Fingerprint Recognition Module Test Kit

INTRODUCTION

FPM093D is a new type of semiconductor fingerprint module with small size, low power consumption, fast recognition speed and high recognition accuracy.

It uses a capacitive fingerprint sensor to effectively detect fake fingers by measuring fingerprint signals. The surface is coated with high hardness, which can greatly reduce the wear of the fingerprint sensor in daily use. In addition, the module can withstand 15KV static electricity and is not easily damaged when used in scenes with high static electricity such as winter.

FEATURE

Fingerprint Module

• Swedish FPC1021 Array fingerprint sensor;
• Sensor surface covered with protective coating;
• RGB three-color LED light;
• UART interface;
• 1.Omm connector, supports reliable connection;
• Fingerprint module supports 3.3V power supply;
• ESD protection level>15KV;
• Supports storage of 100 fingerprint features (stitched 6 times);
• UART serial port communication, default baud rate 57600.

Identification Algorithm

• False recognition rate FAR <1/1000000;
• False rejection rate FRR <1%;
• Response speed, feature extraction time <0.25S, single matching time <0.002S;
• Support fingerprint splicing, maximum splicing times 6 times.

Application Scenarios

• Security field: fingerprint door locks, safes, jewelry boxes, etc;
• Management field: authorization licenses, management software, etc;
• Financial and other identity authentication fields: access control systems, POS machines, attendance machines, etc.

SPECIFICATION

• Supply Voltage: 3.3V (typical value)
• Supply Current: ~30mA (typical value, 3.3V power supply, monochrome LED)
• Sleep Current: <12uA (fingerprint detection)
• Storage Capacity: 100 pieces (6 times splicing)
• Sensor Type: capacitive
• Resolution: 160*160 pixel, 8bit (256 grayscale values)
• Appearance Size: Ф21.00mm
• Installation Size: Ф19.00mm
• Electrostatic Protection: ±15KV
• Natural Wear: >1 million times (repeatedly pressed under O.6N)
• Working Environment: -20℃~+55℃, 40%~85%RH no condensation
• Storage Environment: -40℃~+85℃, <85%RH no condensation
• Interface Type: 1.0mm - 6Pin

SHIPPING LIST

1 * FPM093D Fingerprint Recognition Module

1 * 1.0mm - 6Pin to DuPont Cable

1 * CH340 Serial Port Test Board