-250x250.jpg "Black Silicone End Caps M6*13mm (80pcs)")
Hot
In Stock
Brand: CQRobot
Model: AngelBMP388US
This is a high-precision digital air pressure sensor, integrated with BMP388 chip to achieve data tracking accurately, Monitor atmospheric pressure and temperature, support I2C/SPI interface, and compatible with 3.3V/5v voltage.It compatible with Raspberry/Arduino/STM32 and other motherboards, espec..
$8.99
Ex Tax:$8.99
Hot
Brand: pzsmocn
Model: PZSPZC001A
Micro switch is an electric switch that can be activated with a small physical force, has a small contact interval and a snap-action mechanism, and uses a specified stroke and a specified force to switch the contact mechanism. Because the contact distance of the switch is relatively small, it is cal..
$2.88
Ex Tax:$2.88
Brand: CQRobot
Model: CQRANQI0006US
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$6.99
Ex Tax:$6.99
Brand: CQRobot
Model: CQR-JC2.54OP-F
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.54OP-D
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.54OP-A
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.54OP-E
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99