Brand: CQRobot
Model: CQRDRZW039
INTRODUCTIONZW3021 is a multifunctional fingerprint module with LED that integrates capacitive fingerprint sensor, MCU and fingerprint algorithm. The MCU has its own dual-mode algorithm embedded, with good FRR/-FAR effect and fast recognition speed. It adopts low power consumption and small size des..
$6.13
Ex Tax:$6.13
Brand: CQRobot
Model: CQRDRZW040
INTRODUCTIONZW3021 is a multifunctional fingerprint module with LED that integrates capacitive fingerprint sensor, MCU and fingerprint algorithm. The MCU has its own dual-mode algorithm embedded, with good FRR/-FAR effect and fast recognition speed. It adopts low power consumption and small size des..
$8.63
Ex Tax:$8.63
Brand: CQRobot
Model: CQR-JC2.0CL-A
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.0 mm (0.0787 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to ..
$3.99
Ex Tax:$3.99
Hot
Brand: CQRobot
Model: CQR-JC2.54CL-A
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.54CL-D
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.54CL-C
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.54CL-B
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.54CL-E
Standard Computer Jumper Caps Header Pin Shunt Short Circuit 2-Pin Connector Close Top 2.54mm-Yellow
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.0OP-A
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.0 mm (0.0787 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to ..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC5.08OP-A
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 5.08 mm (0.2 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.0-A
These are two pin jumpers with handle (also called shunts) that will create an electrical connection for the 2.0 mm (0.0787 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to dif..
$3.99
Ex Tax:$3.99
Brand: CQRobot
Model: CQR-JC2.54-D
These are two pin jumpers with handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to diffe..
$3.99
Ex Tax:$3.99