Menu
Your Cart

CQRobot

Brand: CQRobot Model: CQRDZ06
Black 8Ω 5W Subwoofer Audio Dual Indoor Magnetic Speaker (High Quality Built-in Speaker Customized Model).Custom interface, samples...
$8.39
Ex Tax:$8.39
BMP388 Barometric Pressure Sensor for Raspberry Pi, Arduino and STM32. BMP388 Barometric Pressure Sensor for Raspberry Pi, Arduino and STM32.
Hot In Stock
Brand: CQRobot Model: AngelBMP388US
This is a high-precision digital air pressure sensor, integrated with BMP388 chip to achieve data tracking accurately, Monitor atmospheric pressure and temperature, support I2C/SPI interface, and compatible with 3.3V/5v voltage.It compatible with Raspberry/Arduino/STM32 and other motherboards, espec..
$8.99
Ex Tax:$8.99
Brand: CQRobot Model: CQRANQI0006US
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$6.99
Ex Tax:$6.99
Brand: CQRobot Model: CQR-JC2.54OP-F
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot Model: CQR-JC2.54OP-D
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot Model: CQR-JC2.54OP-A
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot Model: CQR-JC2.54OP-E
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot Model: CQR-JC2.54OP-C
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot Model: CQR-JC2.54OP-B
These are two pin jumpers without handle (also called shunts) that will create an electrical connection for the 2.54 mm (0.1 inch) male Pin headers. Commonly used to modify settings on a board or device.Mother board jumper is a manual switch on the motherboard, Through the jumper cap connected to di..
$3.99
Ex Tax:$3.99
Brand: CQRobot Model: CQRSENYW003
The new contact multi-point liquid level sensor is a contact liquid level measurement and control device designed using optical principles. The sensor can detect 4 liquid levels with a detection accuracy of up to ±1mm. The sensor has no mechanical parts and does not require additional debugging. It ..
$13.99
Ex Tax:$13.99
Brand: CQRobot Model: CQRSENYW002
CQRobot Contact Water/Liquid Level Sensor, This is a photoelectric water liquid level sensor that is operates using optical principles. The advantages of this photoelectric water liquid level sensor are good sensitivity and no need for mechanical parts - meaning less calibration! The corrosion resis..
$8.99
Ex Tax:$8.99
Contact Water / Liquid Level Sensor for Raspberry Pi and Arduino. Contact Water / Liquid Level Sensor for Raspberry Pi and Arduino.
Hot In Stock
Brand: CQRobot Model: CQRSENYW002A
CQRobot Contact Water/Liquid Level Sensor, This is a photoelectric water liquid level sensor that is operates using optical principles. The advantages of this photoelectric water liquid level sensor are good sensitivity and no need for mechanical parts - meaning less calibration! The corrosion resis..
$8.99
Ex Tax:$8.99
Showing 349 to 360 of 549 (46 Pages)