USB-Port-GPS Module and 3 Meters Antenna Kit, for Raspberry Pi.

1. Support Raspberry Pi model A, B, A+, B+, Zero, 2, 3 with its' L80-39 GPS chip inside.
   
2. Communicates satellite with UART or USB.
   
3. CP2102 as USB to UART Bridge chip, stable and faster.
   
4. The L80-39 with 66 search channels and 22 simultaneous tracking channels,it acquires and tracks satellites in the shortest time at Outdoor.

Note: This module is fit for outdoor operation. please put the Antana in the open air.

Wiki: http://www.cqrobot.wiki/index.php/Raspberry_Pi_GPS_Module_kit-CQR0048

GPS Module

• GPS: L80-M39
  
• Satellites: 66 acquisition channels, 22 tracking channels
  
• Work Voltage: 4.5V to 5.5V
  
• Weight: 4.35g
  
• Maximum Current: 100mA MAX
  
• Work Temperature: -40 Degree Celsius to +85 Degree Celsius
  
• Position Accuracy: Less Than 2.5M CEP
  
• Velocity Accuracy: Less Than 1.0m/s
  
• Warm/cold Start Without ESEY: Less Than 35s
  
• Warm/cold Start With ESEY: Less Than 15s
  
• Acquisition Sensitivity: -148dBm
  
• Tracking Sensitivity: -165dBm
  
• Update Rate: 1Hz (Default) up to 5Hz
  
• Baud Rate: 4800 bps to 115200 bps 9600bps default
  
• Protocols: NMEA 0183
  
• Mount Cable: 1 * 8 Stacking Header
  
• USB Micro Data Cable
  
• Scale: 16.6 * 26 * 18.6(mm)
  
• Patch Antenna Size: 15.0 * 15.0 * 4.0(mm)
  

GPS Antenna

• Supply Voltage: 3V to 5V DC
  
• Center Frequency: 1575 Plus/Minus 1MHz
  
• Bandwidth: CF Plus/Minus 8MHz
  
• Polarization: RHCP
  
• Gain: 5dBic (Zenith)
  
• V.S.W.R: Less Than 1.5
  
• Impedance: 50Ω
  
• Operating Temperature -40 Degree Celsius to +85 Degree Celsius
  
• Axial Ratio: 3dB (max)
  
• Gain: 28 Plus/Minus 2dB
  
• Waterproof Grade: IP65 to IP67
  
• Connector Type: SMA
  
• Environmentally Friendly: ROHS
  
• Wire Length: 3 M
  
• Dimension: 25 mm * 25 mm * 4 mm
  

SHIPPING LIST

• 1 * Raspberry Pi GPS Module
  
• 1 * GPS Antenna ( 3 M )
  
• 1 * USB Data Wire